Smoke Type Brazed Plate Heat Exchanger
The flue gas heat exchanger is made of stainless steel plates with cross flow channels that are vacuum brazed. lts asymmetric design is applied to the specified continuous flow of flue gas on one side and the flow of high-density medium on the other side. The system design can be assembled as a single component or combined with more flue gas heat exchangers to form a single system.
Product Introduction
The flue gas heat exchanger is made of stainless steel plates with cross flow channels that are vacuum brazed. lts asymmetric design is applied to the specified continuous flow of flue gas on one side and the flow of high-density medium on the other side. The system design can be assembled as a single component or combined with more flue gas heat exchangers to form a single system.
Size
| model | B(mm) | C(mm) | D(mm) | E(mm) | thickness (mm) |
weight (kg) |
Design pressure (Mpa) |
|---|---|---|---|---|---|---|---|
| ZY35 | 124 | 52 | 286 | 227 | 6+3.23N | 1.64+0.124N | 3 |
| ZY36 | 124 | 52 | 286 | 227 | 6+3.23N | 1.64+0.124N | 3 |
| ZY116 | 213 | 621 | 476 | 12+2.26N | 12+0.44N | 1.5 | |
| ZY150 | 202 | 771 | 610 | 12+2.24N | 15+0.5N | 1.5 | |
| ZY340 | 490 | 328 | 780 | 578 | 12+2.08N | 36+ 1.17N | 1.5 |
We may modify and upgrade the parameters listed in the drawings and parameter tables without prior notice. The performance parameters and dimensional drawings are subject to order confirmation.
Welcome To Visit Our Official Website!
If you have any questions, please contact us through the following ways, we will give you the most sincere service!
